What is not a pre-drive task?
Which of the following is not a pre-drive task?
ANSWER: Putting the car in park.
Where should you put your hands on the steering wheel?
A.) 9 o'clock and 3 o'clock.
B.) Midnight
C.) 6 o'clock and 3 o'clock.
D.) 10 o'clock and 2 o'clock.
Get the CORRECT Answer
9 o'clock and 3 o'clock.
Some countermeasures for divided attention include....
ANSWER: Knowing where your turn signal lever is located in your vehicle.
Discarded batteries should be taken to _______.
ANSWER: An authorized dealer.
You are responsible for passengers under the age of _____ wearing seat belts.
ANSWER: 17
To change gears from Park to Drive, you must first ______.
A.) Move the gearshift from Park to Drive
B.) Press the brake pedal with your right foot
C.) Turn the car off
D.) Put your right foot on the accelerator
Get the CORRECT Answer
Press the brake pedal with your right foot
The first step you should take to decelerate is to _______.
A.) Use the emergency brake
B.) Hit the brake pedal
C.) Release pressure on the accelerator
D.) Put the car in neutral
Get the CORRECT Answer
Release pressure on the accelerator
What do you NOT need to check for when locking the vehicle?
ANSWER: Lost bots
When adjusting your mirrors, how should you be sitting?
ANSWER: Sitting up in the driver's seat.
What is the vehicle operating space?
ANSWER: The space around the vehicle that cannot be seen from the driver's seat.
SEE iT is an example of a ______ system.
ANSWER: Space management
What is not a type of driving environment?
ANSWER: Railroad
The brake warning light means ______.
ANSWER: The brake system needs maintenance.
What is NOT a step required to obtain your Class C license?
ANSWER: You must have at least 1 year of driving experience.
What's the earliest you can complete the Impact Texas Teen Drivers course before your behind-the-wheel exam?
ANSWER: 90 days before
Once you obtain your Class C license at 16, you are free to drive your group of friends everywhere. True or false?
ANSWER: False: You cannot have more than one passenger under 21 who isn't a family member until you turn 18.
To turn off your vehicle, you need to put your vehicle in _______.
ANSWER: Park
There are Driver Education courses that can get you a ________.
ANSWER: Discount on auto insurance.
All Aceable drivers make ____ and _____ decisions while driving.
ANSWER: Legal, responsible.
Checking your tires' air pressure will help prevent __
A.) All choices are correct
B.) Blowouts
C.) Skidding
D.) Flat tires
Get the CORRECT Answer
All choices are correct
Where is the best place to change your flat tire?
ANSWER: a flat surface.
What should you keep in your vehicle in case of emergencies?
ANSWER: a wrench, spare tire, and jumper cables
EXPLANATION: Always store a wrench, spare tire, and jumper cables in your vehicle for emergency situations.
When changing a tire, turning the nuts ____ will loosen them.
ANSWER: counter-clockwise
Turning the nuts clockwise will ____ them.
ANSWER: tighten
What is the maximum distance you should drive on a spare tire?
ANSWER: 50 miles
If you can see the top of Lincoln's head, it's time to get new tires.
A.) TRUE
B.) False
Get the CORRECT Answer
TRUE
Over-inflated tires are more likely to have a blowout, and under-inflated tires wear the sides of the tire.
A.) TRUE
B.) False
Get the CORRECT Answer
TRUE
Check your battery terminals to make sure they are not ____.
ANSWER: loose
When using jumper cables, how should the "booster" vehicle be parked in relation to the "dead" vehicle?
ANSWER: facing each other
Most positive battery terminals are ______.
ANSWER: red
On the dead vehicle, where should you place the black jumper cable?
ANSWER: on an unpainted metal surface
If someone is tailgating you, you should:
ANSWER: move into another lane
You are driving on a highway where the posted speed limit is 70mph. The traffic around you is driving 75mph. How fast can you legally drive?
ANSWER: 70
When passing a car, it's safe to return to your original driving lane when
ANSWER: headlights are in review mirror
When driving in fog, use your _
ANSWER: lower beam headlights
What kind of roadways freeze first when wet?
ANSWER: bridges
You may only drive in a biking lane _...
ANSWER: less than 200ft before making a right turn
You need to increase your following distance when:
A.) There is no traffic
B.) You are slowing down
C.) Your vision is clear
D.) You are being tailgated
Get the CORRECT Answer
You are being tailgated
The suggested safe following distance for drivers is __ seconds
A.) 3
B.) 6
C.) 2
D.) 1
Get the CORRECT Answer
3
Increase your following distance if you are following a :
A.) Passenger car
B.) Station wagon
C.) Motorcycle.
Get the CORRECT Answer
ANSWER: motorcycle
Increase your following distance in ____.
A.) driving in poor/inclement weather
B.) being tailgated,
C.) following large trucks
D.) All choices are correct.
Get the CORRECT Answer
All choices are correct.
you should increase your following distance when you are _____. aceable quizlet
A.) following a motorcycle.
B.) driving behind a large vehicle
C.) driving in bad weather
D.) All choices are correct.
Get the CORRECT Answer
All choices are correct.
Yellow pavement markings are used to separate :
ANSWER: traffic lanes on one way streets
When caring for an injured person, you should :
ANSWER: move them from fire, traffic, and apply pressure to wounds
Which of these is not a type of license?
ANSWER: Class J
What does it mean to "yield the right-of-way?"
ANSWER: allowing other vehicle(s) to proceed before you
If you hear sirens and see emergency lights behind you, what should you do?
ANSWER: Pull over to the right
If parking near a corner, you should stay at least ____ away from the crosswalk.
ANSWER: 20 feet
It is legal to turn right at a red traffic light if your path is clear and there are no signs prohibiting it
A.) TRUE
B.) False
Get the CORRECT Answer
TRUE
You're approaching a flashing red traffic light at an intersection. What should you do?
ANSWER: Stop completely, then drive ahead when the intersection is clear.
If a driver refuses to take a breath alcohol test requested by a police officer, the driver will
ANSWER: have their license suspended for violating the Implied Consent law
In which situation should you use high beams?
ANSWER: when you're alone on a poorly lit road
Areas around your vehicle which can't be seen in your mirrors are called .
ANSWER: blind spots
Broken lines painted on the pavement mean .
ANSWER: the line may be crossed
At a T-intersection, yield the right of way to drivers ____.
A.) On the through road
B.) On the private street
C.) On the street with fewer lanes
D.) On the left
Get the CORRECT Answer
on the through road
If you must pass another vehicle, it's best to do so on the .
ANSWER: left
How far in advance of making a turn do you have to activate your turn signal?
How many feet in advance should you signal before turning?
ANSWER: 100 feet
Texas driving law has tougher standards for ____.
ANSWER: minors
The State of Texas has a policy for minors driving under the influence.
ANSWER: Zero Tolerance
If a police officer follows you with lights and sirens on, what should you do?
ANSWER: Pull over to the right of the road.
If you need to reach into your console or glovebox for your documentation, what should you do?
ANSWER: ask permission of the officer and do it slowly
Amedee Bollee created the first___.
Amedee Bollee invented the __________.
Arnedee Bollee invented the ___
A.) hybrid engine.
B.) steam-powered engine.
C.) solar vehicle.
D.) gasoline-fueled internal combustion engine.
Get the CORRECT Answer
steam-powered engine.
__ ____ and ___ ___ created the first gasoline-fueled internal combustion engine.
________________ invented the gasoline-fueled internal combustion engine.
__________ invented the gasoline-fueled internal combustion system
A.) William Durant
B.) Karl Benz and Gottlieb Daimler
C.) Arnedee Bollee
D.) Henry Ford
Get the CORRECT Answer
Karl Benz and Gottlieb Daimler
The Model T was created in expensively due to ___.
The Model T was created inexpensively due to ___.
A.) assembly-line procedures
B.) lots of car options
C.) poor quality materials
D.) cheap taxes
Get the CORRECT Answer
assembly-line procedures
No comments:
Post a Comment