Traffic control devices include:
A.) pavement markings
B.) signal lights
C.) traffic signs
D.) all of the above are correct
Get the CORRECT Answer
Traffic control devices such as signs, signals, and markings affect:
A.) only selected drivers
B.) all traffic
C.) only drivers turning on and off the roadway
D.) neither A nor B is correct
Get the CORRECT Answer
Signs communicate meaning using:
Traffic-control devices communicate meaning using:
Traffic control devices use ___ to communicate their messages.
A.) Color
B.) Shape
C.) Wording
D.) All of the above
Get the CORRECT Answer
The purpose of traffic signs, signals, and pavement markings is to:
A.) prevent traffic movements
B.) promote the orderly flow of traffic
C.) confuse drivers
D.) establish traffic hazards
Get the CORRECT Answer
Regulatory signs that have a red circle with a red slash indicate to you
A.) there is emphasis placed on whatever is inside the circle
B.) there is no prohibition
C.) the restriction applies only at night
D.) there is a prohibition
Get the CORRECT Answer
Regulatory signs:
A.) tell drivers what they may or may not do
B.) warn drivers of hazards
C.) are all diamond shaped
D.) direct drivers to toll booths
Get the CORRECT Answer
You do not have to obey regulatory signs. These signs are in place to provide you guidance about applicable laws at that particular place.
A.) TRUE
B.) FALSE
Get the CORRECT Answer
Guide signs:
A.) may be round or five-sided
B.) tell drivers what they may or may not do
C.) are yellow, orange, or fluorescent yellow/green
D.) provide information about routes, exits, and distances
Get the CORRECT Answer
Warning signs:
A.) are red and white
B.) are generally diamond shaped
C.) tell drivers what they may or may not do
D.) are green and white
Get the CORRECT Answer
Which sign are you not likely to see mounted beside the road?
A.) no passing pennant
B.) slow-moving vehicle sign
C.) train crossing sign
D.) none of the above is correct
Get the CORRECT Answer
The sequence of traffic lights from top to bottom is:
A.) yellow, green, red
B.) red, yellow, green
C.) green, yellow, red
D.) yellow, red, green
Get the CORRECT Answer
A red arrow illuminated on a traffic light means:
A.) you must turn in that direction
B.) the light is about to change to green
C.) you should stop then proceed
D.) you cannot turn in that direction
Get the CORRECT Answer
A flashing red light indicates:
A.) it is broken, so you do not need to pay attention to it
B.) a green light will be appearing soon
C.) to slow and yield to traffic already in the intersection
D.) to stop and proceed only when it is safe
Get the CORRECT Answer
When the signal light ahead turns to yellow you should
A.) understand your right-of-way is about to expire and clear the intersection
B.) speed up so you will not have to stop at the red light that is about to appear
C.) expect to see the green light next
D.) none of the above is correct
Get the CORRECT Answer
A solid yellow pavement line indicates:
A.) the pavement is about to narrow
B.) passing is permitted
C.) a no passing zone
D.) you may not turn left
Get the CORRECT Answer
Yellow pavement lines indicate:
A.) you cannot do something
B.) oncoming traffid is on the opposite side of it
C.) you must turn
D.) the pavement is about to narrow
Get the CORRECT Answer
Dashed white pavement lines separating two lanes indicate:
A.) the pavement is about to narrow
B.) traffic is traveling in the same direction
C.) you may not cross over it
D.) you may not turn
Get the CORRECT Answer
When white arrows are painted on the pavement, drivers in those lanes:
A.) should use the arrows only as guides
B.) do not have to go in the direction of the arrow(s)
C.) must slow down and prepare to yield the right-of-way
D.) must go in the direction of the arrow(s)
Get the CORRECT Answer
A "No Passing" sign is:
A.) five sided
B.) diamond-shaped
C.) pennant-shaped
D.) circular shaped
Get the CORRECT Answer
A "No Passing" sign is:
A.) placed on either side of the road
B.) placed on the right side of the road 1 mile before the no passing zone
C.) placed on the right side of the road at the beginning of the no passing zone
D.) placed on the left side of the road at the beginning of the no passing zone
Get the CORRECT Answer
Railroad advance warning signs are:
Railroad advanced warning signs are:
A.) Red and triangular.
B.) Black on White in the shape of an X.
C.) Orange and diamond-shaped.
D.) Yellow and round.
Get the CORRECT Answer
An odd numbered interstate sign using a single or double digit number indicates a route that:
An odd-numbered interstate with a single or double-digit number indicates a route that:
A.) Runs in a loop around a city
B.) Extends outward from a loop around a city
C.) Runs east and west
D.) Runs north and south
Get the CORRECT Answer
An even-numbered Interstate using a single or digit number indicates a route that:
Even number interstate sign with a single or double digit number indicates that:
A.) runs east and west
B.) Runs north and south
Get the CORRECT Answer
A solid yellow centerline on your side of the road means
A solid yellow line on your side of the road means:
A.) You may not pass.
B.) You may pass, if it is safe to do so
C.) Oncoming vehicles may pass.
D.) You are approaching reversible lanes.
Get the CORRECT Answer
Solid white lines are used to:
A.) Mark the right edge of highways
B.) Between lanes to indicate areas where lane changes are discouraged or unlawful due to increased danger associated with such movements.
C.) Mark shared left turn lanes.
D.) Both A and B.
Get the CORRECT Answer
EXPLANATION: Solid white lines are used to mark the right edge of highways and between lanes to indicate areas where lane changes are discouraged or unlawful due to increased danger associated with such movements.
Solid white lines are used:
A.) To mark the right edge of highways
B.) Between lanes to indicate areas where lane changes are discouraged or unlawful
C.) To mark shared left-turn lanes
D.) Both A and B
Get the CORRECT Answer
What is the MOST important step in safely changing lanes?
A.) Signalling correctly
B.) Checking your blind spot to ensure the lane is open
C.) Checking your rearview mirror
D.) Changing Speed
Get the CORRECT Answer
When should you adjust your speed for a turn?
A.) Before Turning
B.) While Turning
C.) After Turning
D.) There is no need to adjust speed
Get the CORRECT Answer
Reversible lanes are marked with:
A.) double-dashed yellow lines
B.) single-dashed yellow lines
C.) double-dashed white lines
D.) single-dashed white lines
Get the CORRECT Answer
A flashing yellow light at an intersection indicates that you:
A.) should get ready to accelerate
B.) slow down and prepare to stop
C.) stop right away
D.) accelerate right through
Get the CORRECT Answer
Yield signs require drivers to yield the right-of-way to:
A.) vehicles approaching on an intersecting street
B.) vehicles going past them
C.) vehicles driving at a faster speed
D.) vehicles with children in them
Get the CORRECT Answer
What features can drivers use to interpret the meaning of a sign?
A.) color
B.) shape
C.) size
D.) both A and B
Get the CORRECT Answer
Explain the key steps in safely using shared left turn lanes.
Describe the key steps to safely use shared left-turn lanes.
1. Use shared left turn lane only to turn left - if you do not intend to turn left, stay out of the lane.
2. Do not get in the lane too soon - the farther you drive in the center lane, the more likely you are to come into conflict with someone coming from the opposite direction.
3. Watch for vehicles pulling out of driveways/ cross streets - drivers may cut across in front of you or turn into the shared lane to wait for a gap in traffic.
4. Yield the right-of-way to any vehicle that is signaling to enter or that has already entered the lane - if you need to stop in the left turn lane, do so with your front tires pointing straight ahead. This reduces the chance of being pushed into oncoming traffic if struck from the rear of the vehicle.
5. Give youself just enough time and space to check traffic in all directions, signal, enter the lane, straigten out your vehicle and, if neccesary stop.
What color(s) are guide signs?
ANSWER: Green
What color(s) are motorist services signs?
ANSWER: Blue
What color(s) are regulatory signs?
ANSWER: White, Black, Red
What color indicates a significant prohibition?
ANSWER: Red
What color are incident management signs?
ANSWER: Fluorescent Pink
What color are caution signs?
ANSWER: Yellow
What color are significant warning signs (involving life)?
ANSWER: Fluorescent Yellow
What color are temporary work zone signs?
ANSWER: Orange
Explain the meaning of a signal lights three colors
# Red - (Stop) stop prior to the pedestrian crosswalk, stop bar or roadway-edge line. Do not enter the intersection
# Yellow - (Yield) right-of-way is expiring. Clear the intersection (red light follows)
# Green - (GO) when traffic has cleared it is safe to do so, you may enter the intersection
Explain the type(s) of information communicated by the following sign colors: Green, Yellow and Red
# Green - Directional guidance; indicates movement is permitted
# Yellow - General warning / caution
# Red - Stop or prohibition
Explain the type(s) of information communicated by the following sign colors: Blue, Brown and Orange
# Blue - Motorist services guidance
# Brown - Public Recreational and cultural-interest guidance
# Orange - Temporary work/construction zone warning signs
Identify four signs or roadway markings used with reversible lanes
1. Red X - means the lane is closed to you; never drive in lane with red X
2. Green Arrow - you are permitted to drive in a lane with a green arrow signal
3. Steady Yellow X - the driver should safely vacate this lane because it will soon be controlled by a red X
4. Flashing Yellow X - you can use this lane, but only to turn left. When preparing to turn, don't move into lane until near it. (Turn not protected; be sure oncoming traffic is clear)
Describe the difference in meaning between white and yellow road markings
# When you see white and yellow lines separate travel lanes or mark the center of the road, they tell you if traffic is traveling in one or two directions.
# Yellow marking lines separate traffic in opposite directions.
# White marking lines separate traffic lanes moving in the same direction.
No comments:
Post a Comment