A.) back up while using the area visible only in your rearview mirror.
B.) turn your head and shoulders so that you can look through the rear window.
C.) steer in the opposite direction that you turn the steering wheel.
D.) put your car into Park, get out of the vehicle, and eye up the situation.
Get the CORRECT Answer
steer in the opposite direction that you turn the steering wheel.
When you back your vehicle, you should
A.) Back quickly; it is easier to guide your vehicle when you are moving quickly.
B) Back at the same speed you would use when moving forward in that location.
C) Back slowly; your vehicle is much harder to steer while you are backing.
Get the CORRECT Answer
Back slowly; your vehicle is much harder to steer while you are backing.
When you have properly adjusted the inside rearview mirror and outside mirrors on your vehicle,
A.) You will be able to see any vehicles beside you, using your two outside mirrors and the inside rearview mirror.
B.) You will still have blind spots near the sides and rear corners of your vehicle that you cannot see in your mirrors.
C.) You will be able to see any vehicles beside you by using the left outside mirror and the inside rearview mirror.
Get the CORRECT Answer
You will still have blind spots near the sides and rear corners of your vehicle that you cannot see in your mirrors.
Hand-over-hand steering provides effective vehicle control when you're steering
Hand-over-hand steering provides effective vehicle control when you are steering
A.) while accelerating.
B.) while braking.
C.) through tight-radius turns.
D.) through gentle turning maneuvers.
Get the CORRECT Answer
through tight-radius turns.
An accepted technique for managing time and space is
A.) steering.
B.) accelerating.
C.) signaling.
D.) all of the above.
Get the CORRECT Answer
all of the above.
Most hazards or obstacles occur _________ your vehicle and require evasive braking or steering.
A.) Behind
B.) To the left of
C.) In front of
D.) To the right of
Get the CORRECT Answer
In front of
_______ is the ability to change the speed or direction of the vehicle.
A.) Grip
B.) Accelerating
C.) Braking and steering
D.) Accelerating and shifting
Get the CORRECT Answer
Grip
When you step on your brake pedal, you should feel
A.) firm resistance.
B.) no resistance.
C.) the floor.
D.) a drag on the pedal.
Get the CORRECT Answer
firm resistance.
The best way to brake to a stop is to
A.) press the brake pedal as far as it will go.
B.) use the car in front as a guide for your own braking.
C.) apply smooth, steady, firm pressure to the brake pedal.
D.) take as long as possible to stop so the cars behind you will have time to stop.
Get the CORRECT Answer
apply smooth, steady, firm pressure to the brake pedal.
Brakes slow or stop a vehicle by applying ______________________ against the four wheels.
A.) hydraulic pressure
B.) foot-brake pressure
C.) anti-lock pressure
D.) drum and disc pressure
Get the CORRECT Answer
hydraulic pressure
You should not pump the brakes on a car equipped with
A.) electronic fuel injection.
B.) antilock brakes.
C.) radial tires.
D.) large wheels.
Get the CORRECT Answer
antilock brakes.
________ uses friction to slow momentum.
A.) Traction
B.) Steering
C.) Accelerating
D.) Braking
Get the CORRECT Answer
Braking
True or False: If your gas pedal jams, you should turn the key to lock to lock the steering wheel.
A.) TRUE
B.) FALSE
Get the CORRECT Answer
FALSE
The most important factor in maintaining vehicle control is
A.) the condition of the road.
B.) grip.
C.) traction.
D.) the steering wheel.
Get the CORRECT Answer
traction.
Slick or wet, low-traction surface conditions make it hard to control the speed and _______of your vehicle.
A.) visibility
B.) condition
C.) direction
D.) crashworthiness
Get the CORRECT Answer
direction
Which of the following is a part of your vehicle’s communication system?
A.) antilock brakes
B.) seat belts
C.) horn
D.) alternator
Get the CORRECT Answer
horn
Driving at a high ____________ can affect the performance of your vehicle.
A.) altitude
B.) RPM
C.) pressure
D.) Altitude
Get the CORRECT Answer
Altitude
What is changing vehicle balance from side to side called
You can feel a vehicle's side-to-side balance, called its ________
A.) Roll
B.) pitch.
C.) yaw.
D.) stability
Get the CORRECT Answer
roll.
Modified vehicles for people who are physically disabled may include _____.
A.) different seats.
B.) brighter headlights.
C.) special head liners.
D.) wheelchair lifts.
Get the CORRECT Answer
wheelchair lifts.
By keeping your vehicle’s doors locked while you are in the car, you
A.) make the doors less likely to open in a crash.
B.) prevent uninvited people from opening your vehicle door.
C.) keep young children from opening the doors.
D.) do all of the above.
Get the CORRECT Answer
do all of the above.
Which statement below describes a good reason to keep your vehicle's doors locked while you are in the car?
A.) Locked doors decrease the likelihood that they will open in a crash.
B.) Locked doors prevent the driver from opening the door.
C.) Air bags deploy only when the doors are locked.
D.) The anti-lock brake system responds quicker when the doors are locked.
Get the CORRECT Answer
Locked doors decrease the likelihood that they will open in a crash.
Air bags _______________________
A.) require the driver to deploy them.
B.) require the passenger to deploy them.
C.) are active safety devices.
D.) operate without the user having to do anything.
Get the CORRECT Answer
operate without the user having to do anything.
You can quickly transfer weight to the front of your car with __________ .
A.) antilock braking
B.) controlled braking
C.) pump braking
D.) threshold braking
Get the CORRECT Answer
threshold braking
_____ braking is when you squeeze the brake pedal until just before the wheels lock, then ease off the pedal, then squeeze again, repeating until you've reduced your speed enough.
A.) Traditional
B.) Power
C.) ABS
D.) Threshold
Get the CORRECT Answer
Threshold
When dealing with brake failure, after pumping the brakes and downshifting, gradually apply the parking brake in an attempt to _____ slow your vehicle down.
A.) swiftly
B.) aggressively
C.) sharply
D.) smoothly
Get the CORRECT Answer
smoothly
If you find your brakes failing, which of the following should you NOT do?
A.) Pump your brake pedal hard and fast.
B.) Apply your parking brake sharply.
C.) Rub your tires up against the curb to slow down.
Get the CORRECT Answer
Apply your parking brake sharply.
When your brakes fail, first try __.
A.) pumping the brake pedal
B.) holding the brake pedal down
C.) pressing the accelerator
D.) kicking the brake pedal
Get the CORRECT Answer
pumping the brake pedal
You are driving on a slippery road, in a car that does not have Anti-lock Brakes (ABS). If your car starts to skid sideways when you step on the brake, you should
A.) Continue pressing firmly on the brake, and steer in the direction you want to go.
B.) Quickly apply the parking brake to try to straighten the car.
C.) Then release the parking brake, and push gently on the brake pedal.
D.) Take your foot off the brake, unless you are about to hit something.
E.) Steer in the direction of the skid to straighten your car. Then brake gently.
Get the CORRECT Answer
Steer in the direction of the skid to straighten your car. Then brake gently.
Before exiting your vehicle, make sure gear selector is in (P)ark position. Some vehicles with manual transmission,however, may require that you place the gear selector in ___________ position.
A.) (P)ark
B.) (1)st
C.) (R)everse
D.) (N)eutral
Get the CORRECT Answer
(N)eutral
Most vehicles will require you to lock the ignition to ______ the key.
A.) Insert
B.) Remove
C.) Turn
Get the CORRECT Answer
Remove
If a vehicle is equipped with Anti-lock Braking System, the ABS light will illuminate for a few seconds at start up.
A.) True
B.) False
Get the CORRECT Answer
TRUE
In a vehicle with a standard transmission, one must slowly release the clutch and depress the accelerator at the sametime to move the vehicle without stalling the engine.
A.) True
B.) False
Get the CORRECT Answer
TRUE
The effectiveness of restraint devices like air bags and safety belts, and vehicular construction features such as crumple zones and side member beams, increase as impact speed increases.
A.) True
B.) False
Get the CORRECT Answer
False
Safety belts are designed _______.
A.) to automatically buckle
B.) with an emergency locking mechanism
C.) to automatically release on impact
D.) to unbuckle automatically
Get the CORRECT Answer
with an emergency locking mechanism
Vehicles driving in the opposite direction on a multi-lane highway with opposite lanes separated by a raised barrier do not have to stop for school buses.
A.) True
B.) False
Get the CORRECT Answer
False
EXPLANATION: If the highway is divided by a raised barrier or an unpaved median at least five feet wide, you do not have to stop if you are moving in the opposite direction of the bus.
EXPLANATION: If the highway is divided by a raised barrier or an unpaved median at least five feet wide, you do not have to stop if you are moving in the opposite direction of the bus.
You can check your headlights, taillights, brake lights, and turn signal lights by watching their reflection on a wall or on a garage door.
A.) True
B.) False
Get the CORRECT Answer
TRUE
EXPLANATION: Headlight, taillights, brake lights, and turn signal lights can burn out. Check them by watching their reflection on a wall or a garage door. You may also ask someone to help you. Defective lights make your car hard to see.
Keep headlights aimed properly. Headlights aimed too high can temporarily blind an oncoming driver. Headlights aimed too low reduce your sight distance at night or during low-visibility conditions.
EXPLANATION: Headlight, taillights, brake lights, and turn signal lights can burn out. Check them by watching their reflection on a wall or a garage door. You may also ask someone to help you. Defective lights make your car hard to see.
Keep headlights aimed properly. Headlights aimed too high can temporarily blind an oncoming driver. Headlights aimed too low reduce your sight distance at night or during low-visibility conditions.
If the brake warning light comes on as you are driving, you should
If the brake light comes on as you are driving, you should
A.) slow down and drive the vehicle home
B.) have the brake systems inspected immediately and repaired as needed
C.) shut off the warning light
D.) ignore it the first time it happens
Get the CORRECT Answer
have the brake systems inspected immediately and repaired as needed
Position your vehicle in the _______of your lane before turning right and move toward the centerline when you are about to turn left.
A.) Left Lane
B.) Right Lane
C.) middle
D.) center
Get the CORRECT Answer
right side
When you pull into the middle of an intersection to properly secure a left turn, you are ____.
A.) impeding traffic in the intersection
B.) declaring your intention to turn
C.) creating a hazard
D.) yielding to left turn traffic from the opposite direction
Get the CORRECT Answer
declaring your intention to turn
How far away from the yellow line in the middle of the road should you be when making a left turn?
A.) 2-4 inches
B.) 3-6 inches
C.) 6-9 inches
D.) 9-12 inches
Get the CORRECT Answer
3-6 inches
EXPLANATION: As you approach the intersection, your car should be about three to six inches from the yellow dividing line in the middle of the road.
EXPLANATION: As you approach the intersection, your car should be about three to six inches from the yellow dividing line in the middle of the road.
No comments:
Post a Comment