When shifting gears with a manual transmission, the clutch must be:
A.) Pushed to the friction point
B.) Always be pushed all the way to the floor
C.) Pushed past the friction point
D.) None of the above is correct
Get the CORRECT Answer
On a vehicle with a manual transmission, the point at which the engine begins to move the car as the clutch is released is called the __________________.
A.) Friction point
B.) Blending point
C.) Matching point
D.) Friction cuff
Get the CORRECT Answer
EXPLANATION: What is the friction point of a clutch - On a vehicle with a manual transmission, the point at which the engine begins to move the car as the clutch is released is called the friction point of a clutch
The friction point of the clutch is the point at which the clutch pedal is:
A.) Pushed all the way to the floor
B.) Let all the way up from the floor
C.) Let up part way to a point where the gears grind
D.) Let up part way to a point where the engine starts to move the vehicle
Get the CORRECT Answer
On a vehicle with a manual transmission, when shifting gears, you should press the clutch:
On a vehicle with a manual transmission how far should you press the clutch pedal
When shifting gears you should press the clutch
A.) About half-way down.
B.) Down about an inch.
C.) Not at all.
D.) All the way to the floor.
Get the CORRECT Answer
When shifting gears, you should:
A.) Look at your pedals to make sure the clutch pedal is all the way to the floor
B.) Keep your left foot on the brake
C.) Look at your shift lever to ensure you are in the proper gear
D.) Be able to shift without looking at the pedals or shift lever
Get the CORRECT Answer
When shifting from first to second, the correct procedure is:
A.) Clutch pedal down, accelerator pedal up, shift
B.) Clutch pedal down, shift, accelerator pedal up
C.) Accelerator pedal up, clutch pedal down, shift
D.) Accelerator pedal up, shift, clutch pedal down
Get the CORRECT Answer
First gear in a vehicle with a manual transmission should be used for speeds up to approximately:
A.) 5 mph
B.) 10 mph
C.) 15 mph
D.) 20 mph
Get the CORRECT Answer
On a vehicle with a manual transmission, fourth and fifth gears are generally engaged at speeds over:
A.) 15 to 25 mph.
B.) 25 to 35 mph.
C.) 40 to 50 mph.
D.) None of the above is correct
Get the CORRECT Answer
When you park and leave a manual shift vehicle, it is best to set the parking brake and shift to:
A.) First Gear
B.) Neutral
C.) Reverse
D.) Both First Gear and Reverse
Get the CORRECT Answer
On a vehicle with a manual transmission, when shifting gears, you should look:
A.) At the dash gauges.
B.) At the gear lever.
C.) At the side of the highway.
D.) Along your intended path of travel.
Get the CORRECT Answer
On a vehicle with a manual transmission, a frequent mistake is:
A.) Shifting into a higher gear at too high a speed.
B.) Shifting into a higher gear at too low a speed.
C.) Shifting into a lower gear at too low a speed.
D.) Shifting into a lower gear at too high a speed.
Get the CORRECT Answer
On a vehicle with a manual transmission, "riding the clutch" will:
A.) Rapidly wear the clutch's surface.
B.) Create a "drag" on your vehicle speed.
C.) Increase your gas mileage.
D.) All of the above are correct.
Get the CORRECT Answer
On a vehicle with a manual transmission, if you do not operate the clutch pedal properly you could:
A.) Stall your engine.
B.) Experience bumpy jerks when slowing.
C.) Have the vehicle jerk forward when you attempt to accelerate.
D.) All of the above
Get the CORRECT Answer
You are driving a manual-shift vehicle in third gear at 30 mph and you plan to turn right at the next intersection. The street has a slight uphill grade. It is best to:
A.) Downshift to second gear and slow before the turn
B.) Slow down with the brake and downshift after the turn
C.) Brake some before the turn and accelerate after the turn
D.) Brake before the turn, push the clutch pedal down during the turn, and downshift after the turn, if needed.
Get the CORRECT Answer
The primary challenge of driving a vehicle with a manual transmission is learning to:
The primary challenge in driving a manual transmission vehicle is learning to:
A.) Release the clutch smoothly to move forward
B.) Press the accelerator to increase engine speed appropriately
C.) Depress the clutch when coming to a stop
D.) Downshift before entering a turn
Get the CORRECT Answer
Which of the following are considered to be vulnerable road users?
Who are considered to be the most vulnerable roadway users?
A.) Pedestrians
B.) Motorcyclists
C.) Bicyclists
D.) All of the above
Get the CORRECT Answer
In crashes involving a passenger vehicle and a motorcycle, the motorcyclist is usually at fault
In crashes involving a car and a motorcycle, the motorcyclists is usually at fault
A.) True
B.) False
Get the CORRECT Answer
In crashes involving a passenger vehicle turning left and a motorcycle, the _______ ______ is usually at fault.
ANSWER: passenger vehicle
Which of the following statements is true regarding sharing the road with large trucks?
A.) Large trucks stop in less distance than other vehicles.
B.) Large trucks have multiple mirror blind zones, called no zones, around them.
C.) Drivers of large trucks typically are unmotivated to drive safely.
D.) Large trucks can make tight right and left turns.
Get the CORRECT Answer
Which of the following statements is true regarding sharing the road with large trucks?
A.) Large trucks stop in less distance than other vehicles.
B.) Large trucks have multiple mirror blind zones around them.
C.) Drivers of large trucks typically are unmotivated to reach their destinations safely.
D.) Large trucks can turn left and right tightly using little space.
Get the CORRECT Answer
Driving courtesy is important as you share the road with:
A.) Drivers in funeral processions
B.) Vulnerable road users
C.) Farm machinery operators
D.) All of the above
Get the CORRECT Answer
Drivers of passenger vehicles are at significant risk of serious injury and death when colliding with
A.) Trains
B.) Bicyclists
C.) Domestic animals
D.) Skateboarders
Get the CORRECT Answer
What should you not do when you see the flashing lights of a police officer behind you?
A.) Let the law enforcement officer know that you see them.
B.) Reduce your speed until you pull over.
C.) Pull over in a safe location.
D.) Reach for any object, or into the glovebox, console, under your seat or down to the floorboard.
Get the CORRECT Answer
Compared to a passenger sedan, how far back should you follow a motorcycle?
A.) Closer to the motorcycle.
B.) Farther back from the motorcycle.
C.) About the same distance.
D.) 6 motorcycle lengths
Get the CORRECT Answer
When being passed:
A.) Move to lane position 3 (the right side of lane)
B.) Move to lane position 2 (the left side of lane)
C.) Maintain speed and lane position
D.) Slow down and maintain lane position
Get the CORRECT Answer
The front brake supplies 70% of a motorcycles braking power.
A.) True
B.) False
Get the CORRECT Answer
When a stopped school bus has its red lights flashing, vehicles going in both directions of a roadway are:
A.) Required to stop
B.) Not required to stop
C.) Required to stop only if in lanes going toward the rear of school bus
D.) Required to stop only if in lanes going toward the front of the school bus
Get the CORRECT Answer
When a stopped school bus has its red lights flashing, vehicles going in both directions of a divided roadway are:
A.) Required to stop
B.) Not required to stop
C.) Required to stop only if in lanes going toward the rear of school bus
D.) Required to stop only if in lanes opposite the divider going toward the front of the school bus
Get the CORRECT Answer
When you park or leave your vehicle:
ANSWER: Make sure it is low or reverse gear with parking brake set
Explain the purpose of the clutch.
To interrupt the connection between the engine and the transmission. The clutch disengages the connection between the engine and transmission to allow gear changes. To connect the rotating engine shaft to the gears in the transmission.
Explain the purpose of (a) the forward gears and (b) neutral gear.
Forward gears- used to match the vehicle's speed for optimum engine performance and to maximize fuel mileage. (Typically 5-6 forward gears). To provide range of power and speed.
Neutral gear- (Not in gear). The engine is not connected to the drive shaft. Is used when you start the engine or when the car is stopped with the engine running. A vehicle in neutral rolls easily
Explain why a driver should not leave his or her foot on the clutch pedal after having shifted gears when the vehicle is in motion.
Why should a driver never leave his/her foot on the clutch pedal after having shifted gears when the vehicle is in motion?
Such a habit, called "riding the clutch," rapidly wears the clutch surface and causes slippage. Rest your left foot on the "dead pedal" to the left of the clutch pedal until it is time to shift again.
Explain the process of securing a manual transmission vehicle.
* Come to a complete stop with wheels straight or turned away from curb
* Keep clutch pedal depressed
* Shift to first gear or reverse as appropriate
* Set parking brake
* Turn off all accessories and lights
* Make sure windows are closed
* Turn off ignition and remove the key
* Check mirrors/blind spots over your shoulder for traffic
* Exit with keys in your hands
* Lock your doors
Outline the basic procedure for stopping a vehicle that is going more than 30 mph
* Press brake pedal & when your speed safely matches the next lowest gears shifting point, downshift to gear
* Continue to brake and downshift until reach 2nd gear
* Full release of the clutch pedal after each shift is required to maintain control over acceleration.
* After you slowed to about 15 mph or less to avoid stalling
* Press the clutch down and brake the vehicle to stop
No comments:
Post a Comment