While you are driving on a two-lane road, the car behind you tries to pass you. but the passing car is only partly ahead of you when oncoming traffic gets dangerously close. you should
A.) honk your horn and flash your headlights at the oncoming traffic, to warn them to move over.
B.) steer to the right, onto the right shoulder if there is one, and brake hard if needed. be prepared to drive off the right side of the road to avoid a crash.
C.) push your gas pedal to the floor and speed up, so the passing car will be able to brake and pull in behind you
When approaching a railroad crossing without mechanical gatse or lights, you should:?
➜ When approaching a railroad crossing with mechanical gates, you should
A.) Continue at normal safe speed because the railroad is not being used
B.) Continue at normal safe speed and look around for trains if possible.
C.) Slow down, look and listen for a train and be prepared to stop
D.) Always come to a complete stop
You are required to stop at a railroad crossing with lights and mechanical gates when:
A.) The mechanical gates are up
B.) The parking lot near the crossing is full
C.) The railroad crossing lights are flashing
D.) You hear the trains horn
When driving on a multi-lane highway and you see red reflectors in the middle of the roadway you are:
A.) Driving on the wrong side of the road
B.) Should proceed with caution
C.) Approach a no-passing zone
D.) Approaching a traffic light
The right-of-way should be given at an intersection having no traffic signs or signals to the vehicles:
➜ The right of way should be given at an intersection having no traffic signs or signals to the vehicle
A.) That enters or crosses a state highway from a secondary road
B.) That enters or crosses a paved road from an unpaved road
C.) That is already at the intersection upon your arrival
D.) All of the above
The right-of-way should be given at an intersection where there is a four-way stop sign to the vehicle:
A.) Does not have their blinker flashing
B.) That arrives at the intersection first
C.) That flashes their headlights first
D.) That enters from the southwest side of the intersection
When approaching an intersection at which you need to turn, you should
A.) Reduce your speed and make a safe turn
B.) Yield the right of way to all pedestrians crossing
C.) Check for bicyclists and pedestrians coming from behind
D.) All of the above
Unless otherwise posted, the speed limit on a rural interstate highway is
➜ Unless otherwise posted, the speed limit on the rural interstate highway is:
➜ The speed limit for a passenger car traveling on rural interstate highway, unless posted otherwise is
➜ The speed limit on a Rural interstate highway
ANSWER: 70 mph
A double solid white center line on the highway means
➜ A double solid white line painted between lanes on the highway means...
➜ A double solid white center line means
➜ A double solid white center line on the highway means
ANSWER: Changing lanes is not allowed.
A double solid yellow line in the center of the highway means:
➜ A double solid yellow line in the center highway means
ANSWER: Do not pass
Your car has a breakdown while you were driving forcing you to stop you should try to stop completely out of traffic lanes in a place where your car can be seen for
➜ Your car has a breakdown while you are driving, forcing you to stop. You should try to stop completely out of the traffic lanes in a place where your car can be seen for how many feet?
A.) 200 feet in each direction.
B.) 150 feet in each direction.
C.) 100 feet in each direction
You must dim your high-beam headlights within:
➜ High beam headlights must NOT be used within:
A.) 300 feet of oncoming vehicles
B.) 400 feet of oncoming vehicles
C.) 500 feet of oncoming vehicles
D.) 200 feet of oncoming vehicles
When a traffic signal shows a steady yellow light, the driver should:
➜ When approaching a traffic signal showing a steady yellow light, you should:
A.) Speed up through the intersection to miss the eventual red light
B.) Stop if possible /Stop if you can
C.) Make a right turn
D.) Both A and B are correct
When passing a vehicle on a two-lane roadway, you must return to the right hand side of the road before coming within
➜ On a two lane highway when passing a vehicle you must return to the right hand side at least
A.) 200 feet of an oncoming vehicle.
B.) 300 feet of an oncoming vehicle.
C.) 400 feet of an oncoming vehicle.
D.) 500 feet of an oncoming vehicle.
On a two-lane highway you may not pass a vehicle if you are within ____ feet of a bridge
A.) 200 feet
B.) 50 feet
C.) 400 feet
D.) 100 feet
When the center line on the roadway is double yellow, this means:
➜ A solid yellow line on the right side of a broken yellow center line means:
A.) You are not allowed to pass
B.) You are not allowed to make a turn
C.) You may pass with caution
D.) You must come to a complete stop
E.) You are entering a school zone
F.) You need to slow down
When a traffic signal has malfunctioned, you must:
A.) Treat the intersection as a four-way stop
B.) Yield the right-of-way and proceed with caution
C.) Pull off to the side and wait for instructions from law enforcement
D.) Proceed with caution
When approaching an intersection with a green light, you should:
➜ When you approach an intersection with a green traffic light, you should:
A.) Always keep your speed at the speed limit.
B.) Approach at a speed that will allow you to stop if the light changes.
When approaching an intersection with a pedestrian crossing the street carrying a white cane with a red tip, you must:
A.) Stop and let the pedestrian cross
B.) Slow down and pull off to the shoulder
C.) Reduce your speed to 10 mph
D.) Proceed with caution
When at an intersection where the traffic signal is showing a flashing yellow light, this means:
A.) You may proceed with caution
B.) Vehicles must stop and yield the right-of-way
C.) A railroad crossing is ahead and to proceed with caution
D.) You must come to a stop
When at an intersection where the traffic signal is showing a flashing red light, this means:
A.) Proceed with caution
B.) Come to a complete stop and then proceed with caution
C.) You must reduce speed to 15 mph
D.) You must make a right at the next turn
When approaching an intersection, you must proceed with caution to avoid colliding with:
A.) Bicyclists and pedestrians traveling from any direction
B.) No one since you have the right-of-way
C.) Bicyclists and pedestrians traveling from your right
D.) Bicyclists and pedestrians traveling from behind you
When stopped at a red light at an intersection in a left lane on a one-way street and the cross street is also a one-way from right to left you may:
A.) Make a right turn
B.) Make a left turn
C.) Proceed forward after coming to a complete stop
D.) All of the above
Motorists must yield the right-of-way when turning left at an intersection when pedestrians are crossing from:
A.) The left side
B.) Any direction
C.) The right side
D.) The opposite direction
When a traffic officer directs you proceed through an intersection when the red light is visible, you should:
➜ When a traffic officer directs you proceed through the intersection when the red light is visible you should
A.) Treat as a stop sign
B.) Come to a stop and wait for the light to turn green
C.) Follow the officer's instructions and proceed through the intersection with caution
D.) Stop until the light changes yellow
A.) honk your horn and flash your headlights at the oncoming traffic, to warn them to move over.
B.) steer to the right, onto the right shoulder if there is one, and brake hard if needed. be prepared to drive off the right side of the road to avoid a crash.
C.) push your gas pedal to the floor and speed up, so the passing car will be able to brake and pull in behind you
Get the Correct ANSWER
steer to the right, onto the right shoulder if there is one, and brake hard if needed. be prepared to drive off the right side of the road to avoid a crash.
When approaching a railroad crossing without mechanical gatse or lights, you should:?
➜ When approaching a railroad crossing with mechanical gates, you should
A.) Continue at normal safe speed because the railroad is not being used
B.) Continue at normal safe speed and look around for trains if possible.
C.) Slow down, look and listen for a train and be prepared to stop
D.) Always come to a complete stop
Get the Correct ANSWER
Slow down, look and listen for a train and be prepared to stop
You are required to stop at a railroad crossing with lights and mechanical gates when:
A.) The mechanical gates are up
B.) The parking lot near the crossing is full
C.) The railroad crossing lights are flashing
D.) You hear the trains horn
Get the Correct ANSWER
the railroad crossing lights are flashing
When driving on a multi-lane highway and you see red reflectors in the middle of the roadway you are:
A.) Driving on the wrong side of the road
B.) Should proceed with caution
C.) Approach a no-passing zone
D.) Approaching a traffic light
Get the Correct ANSWER
driving on the wrong side of the road
The right-of-way should be given at an intersection having no traffic signs or signals to the vehicles:
➜ The right of way should be given at an intersection having no traffic signs or signals to the vehicle
A.) That enters or crosses a state highway from a secondary road
B.) That enters or crosses a paved road from an unpaved road
C.) That is already at the intersection upon your arrival
D.) All of the above
Get the Correct ANSWER
all of the above
The right-of-way should be given at an intersection where there is a four-way stop sign to the vehicle:
A.) Does not have their blinker flashing
B.) That arrives at the intersection first
C.) That flashes their headlights first
D.) That enters from the southwest side of the intersection
Get the Correct ANSWER
that arrives at the intersection first
When approaching an intersection at which you need to turn, you should
A.) Reduce your speed and make a safe turn
B.) Yield the right of way to all pedestrians crossing
C.) Check for bicyclists and pedestrians coming from behind
D.) All of the above
Get the Correct ANSWER
All of the above
Unless otherwise posted, the speed limit on a rural interstate highway is
➜ Unless otherwise posted, the speed limit on the rural interstate highway is:
➜ The speed limit for a passenger car traveling on rural interstate highway, unless posted otherwise is
➜ The speed limit on a Rural interstate highway
ANSWER: 70 mph
A double solid white center line on the highway means
➜ A double solid white line painted between lanes on the highway means...
➜ A double solid white center line means
➜ A double solid white center line on the highway means
ANSWER: Changing lanes is not allowed.
A double solid yellow line in the center of the highway means:
➜ A double solid yellow line in the center highway means
ANSWER: Do not pass
Your car has a breakdown while you were driving forcing you to stop you should try to stop completely out of traffic lanes in a place where your car can be seen for
➜ Your car has a breakdown while you are driving, forcing you to stop. You should try to stop completely out of the traffic lanes in a place where your car can be seen for how many feet?
A.) 200 feet in each direction.
B.) 150 feet in each direction.
C.) 100 feet in each direction
Get the Correct ANSWER
200 feet in each direction.
You must dim your high-beam headlights within:
➜ High beam headlights must NOT be used within:
A.) 300 feet of oncoming vehicles
B.) 400 feet of oncoming vehicles
C.) 500 feet of oncoming vehicles
D.) 200 feet of oncoming vehicles
Get the Correct ANSWER
500 feet of oncoming vehicles
When a traffic signal shows a steady yellow light, the driver should:
➜ When approaching a traffic signal showing a steady yellow light, you should:
A.) Speed up through the intersection to miss the eventual red light
B.) Stop if possible /Stop if you can
C.) Make a right turn
D.) Both A and B are correct
Get the Correct ANSWER
Stop if possible /Stop if you can
When passing a vehicle on a two-lane roadway, you must return to the right hand side of the road before coming within
➜ On a two lane highway when passing a vehicle you must return to the right hand side at least
A.) 200 feet of an oncoming vehicle.
B.) 300 feet of an oncoming vehicle.
C.) 400 feet of an oncoming vehicle.
D.) 500 feet of an oncoming vehicle.
Get the Correct ANSWER
200 feet of an oncoming vehicle
On a two-lane highway you may not pass a vehicle if you are within ____ feet of a bridge
A.) 200 feet
B.) 50 feet
C.) 400 feet
D.) 100 feet
Get the Correct ANSWER
100 feet
When the center line on the roadway is double yellow, this means:
➜ A solid yellow line on the right side of a broken yellow center line means:
A.) You are not allowed to pass
B.) You are not allowed to make a turn
C.) You may pass with caution
D.) You must come to a complete stop
E.) You are entering a school zone
F.) You need to slow down
Get the Correct ANSWER
you are not allowed to pass
When a traffic signal has malfunctioned, you must:
A.) Treat the intersection as a four-way stop
B.) Yield the right-of-way and proceed with caution
C.) Pull off to the side and wait for instructions from law enforcement
D.) Proceed with caution
Get the Correct ANSWER
treat the intersection as a four way stop
When approaching an intersection with a green light, you should:
➜ When you approach an intersection with a green traffic light, you should:
A.) Always keep your speed at the speed limit.
B.) Approach at a speed that will allow you to stop if the light changes.
Get the Correct ANSWER
Approach at a speed that will allow you to stop if the light changes.
When approaching an intersection with a pedestrian crossing the street carrying a white cane with a red tip, you must:
A.) Stop and let the pedestrian cross
B.) Slow down and pull off to the shoulder
C.) Reduce your speed to 10 mph
D.) Proceed with caution
Get the Correct ANSWER
stop and let the pedestrian cross
When at an intersection where the traffic signal is showing a flashing yellow light, this means:
A.) You may proceed with caution
B.) Vehicles must stop and yield the right-of-way
C.) A railroad crossing is ahead and to proceed with caution
D.) You must come to a stop
Get the Correct ANSWER
you may proceed with caution
When at an intersection where the traffic signal is showing a flashing red light, this means:
A.) Proceed with caution
B.) Come to a complete stop and then proceed with caution
C.) You must reduce speed to 15 mph
D.) You must make a right at the next turn
Get the Correct ANSWER
come to a complete stop and then proceed with caution
When approaching an intersection, you must proceed with caution to avoid colliding with:
A.) Bicyclists and pedestrians traveling from any direction
B.) No one since you have the right-of-way
C.) Bicyclists and pedestrians traveling from your right
D.) Bicyclists and pedestrians traveling from behind you
Get the Correct ANSWER
bicyclists and pedestrians traveling from any direction
When stopped at a red light at an intersection in a left lane on a one-way street and the cross street is also a one-way from right to left you may:
A.) Make a right turn
B.) Make a left turn
C.) Proceed forward after coming to a complete stop
D.) All of the above
Get the Correct ANSWER
make a left turn
Motorists must yield the right-of-way when turning left at an intersection when pedestrians are crossing from:
A.) The left side
B.) Any direction
C.) The right side
D.) The opposite direction
Get the Correct ANSWER
any direction
Also Motorist must yield the right of way to pedestrians crossing An intersection without signals or traffic signs
Also Motorist must yield the right of way to pedestrians crossing An intersection without signals or traffic signs
When a traffic officer directs you proceed through an intersection when the red light is visible, you should:
➜ When a traffic officer directs you proceed through the intersection when the red light is visible you should
A.) Treat as a stop sign
B.) Come to a stop and wait for the light to turn green
C.) Follow the officer's instructions and proceed through the intersection with caution
D.) Stop until the light changes yellow
Get the Correct ANSWER
follow the officer's instructions and proceed through the intersection with caution
No comments:
Post a Comment